ASSIGNABLE ACTIONS and option suggestions

ASSIGNABLE ACTIONS suggestions. Actually i used this actions in SooperLooper.

1. Add option “SELECT ALL” Example: For select all loops for fade in/out- For panning all in one moment .

2. Add “TRIGGER”. Example: Trigger + SelectT All = Effect screeching

3. Add “UNDO”. Example: UNDO LAST ACTION (Delete overdub only, for example. )

4. Add “MUTE”. Example: (Individual) (only mute) (no mute or recording)

5. Add “VOLUME IN” (INPUT GAIN) Example: For Fader controls. If you use different instruments is very interesting because de volumes are not the same.

6. Add “VOLUME OUT” Example: Volume "Select All" or volume out + down fader= fade out, for end songs) ;)

7. SEPARATE COMMANDS. It’s a good idea combine actions, but for me is very dangerous. It's good to have combined and uncombined.

8. COLLAPSED ACTIONS AVAILABLE Example: It is interesting for create effect Screeching (Unmute all + trigger) (this is one command very IMPORTANT) Combine volume: Vol1 + Vol2 in a fadder1 (for strings) // Vol 3 +Vol 4 in fadder 2 (for voices) // Vol 5+ Vol6 in fadder 3 (for percussions).

9. Add option “SELECTED TRACK” (this is default, but i think is interest if this option are visible in one command) Example: Record in SELECTED track, overdub in select track, mute select track.

Or you define VOLUME OUT In one fader with volume Select All. Elegant end for a loop seasion.

RESUME

ADD OPTION For track:

1. SELECT ALL Tracks

ADD ACTIONS:

1. TRIGGER
2. UNDO
3. MUTE (individual, not recording if track is blank)
4. VOLUME IN (input gain
5. VOLUME OUT

MODIFICATIONS:

1. SEPARATE COMMANDS (no mute and record if it's blank or similar actions combined)
2. COLLAPSED ACTIONS AVAILABLE: ASSIGN DIFFERENT ACTIONS IN ONE CC
3. Add SELECTED Track